How to Use — PPSU Tumbly Grip Cup

Everything you need to know about assembling, cleaning, and safely using your BEEBIYOO PPSU Tumbly Grip Cup.

What’s in the Box

Depending on the model, your cup may include:

  • Protective Cap — PP + Silicone

  • Spout — Silicone

  • Handle — PP

  • Weighted Straw — Silicone + Stainless Steel

  • Bottle Body — PPSU

The protective cap helps keep the spout clean between uses.

The spout incorporates our Anti-Colic Design with One-Way Air Vent System.

The weighted straw is designed to allow drinking from different angles.

Available Sizes

210ml

Standard Spout

300ml

Standard Straw Mouthpiece

Material & Sterilisation Reference

[Insert PPSU Tumbly Grip Cup Material & Sterilisation Table]

The table should show:

  • Component

  • Material

  • Temperature rating

  • Boiling compatibility

  • Steam compatibility

  • UV compatibility

  • Dishwasher compatibility

  • Microwave compatibility

Spout Guide

[Insert Spout Guide Table]

Every baby is different.

Use age recommendations as a general guide and observe your child’s drinking behaviour to determine which spout works best.

Assembly

Step 1 — Attach the Straw

Insert the straw into the spout until it sits securely and flush.

Step 2 — Insert the Spout

Insert the spout into the handle until fully seated.

Step 3 — Attach the Handle

Screw the handle clockwise onto the PPSU bottle body until secure.

Step 4 — Check the Air Valve

Make sure the air valve is open before use.

Do not pierce or enlarge the valve opening.

Step 5 — Add the Protective Cap

Place the protective cap on top when storing or transporting the cup.

Cleaning After Each Use

Step 1 — Disassemble

Separate the cup components.

Step 2 — Rinse Immediately

Rinse all parts as soon as possible after use.

Step 3 — Wash

Clean using:

  • Warm water

  • Mild cleanser

  • A soft bottle brush

  • A silicone brush

Pay particular attention to:

  • The inside of the straw

  • The spout

  • The air vent

  • Areas where milk residue may collect

Step 4 — Rinse

Rinse thoroughly to remove all cleanser.

Step 5 — Air Dry

Allow every component to air dry completely in a clean, well-ventilated place before reassembly.

Sterilisation by Component

[Insert PPSU Tumbly Grip Cup Sterilisation Table]

Always follow the component-specific temperature and sterilisation limits.

Important

Do not microwave the spout or straw.

Do not put the spout or straw in the dishwasher.

Important Safety Notes

  • Always use under adult supervision.

  • Do not use the spout as a pacifier.

  • Use only for feeding milk or water.

  • The straw is not suitable for babies under 6 months.

  • Always check liquid temperature before giving the cup to your baby.

  • Do not fill the cup with hot or boiling liquids.

  • Do not shake the cup as this may cause spills.

  • Do not pierce the air vent hole with sharp objects.

  • The V-shaped air vent is delicate and should not be enlarged or modified.

  • Inspect the spout regularly.

  • Replace the spout immediately if damaged.

  • Teething babies may bite through silicone, so inspect silicone parts frequently.

  • Keep the weighted straw ball and all other small components out of reach when the product is disassembled.

  • Some babies may have sensitivity to silicone. If irritation occurs, stop using the product and consult a healthcare professional if necessary.

  • Measurement markings on the cup are for reference only.

  • Use an appropriate measuring tool when precise measurements are required.